M7284Q1009/U - HONEYWELL - ACTUATOR 120V 50/60HZ;30 SEC; 150LN-IN

The Series 72 Modutrol IV Motors spring return and non-spring return motors are used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed.

Features

• Integral spring return returns motor to normal position when power is interrupted.

• Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position.

• Motor and circuitry operate from 24 Vac.

• Quick-connect terminals are standard--screw terminal adapter is available.

• Adapter bracket for matching shaft height of older motors is available.

• Motors have field adjustable stroke (90 to 160 degrees).

• Integral auxiliary switches are available factory mounted, or can be field added.

• Spring return motors can operate valve linkages from power end or auxiliary end shafts for normally closed or normally open valve applications.

• All models have dual shafts (slotted and tapped on both ends).

• All models have auxiliary switch cams.

• Fixed torque throughout the entire voltage range.

• Motors are designed for either normally open or normally closed valves and dampers.

• Models available with adjustable start (zero) and span.

• Models available with 4 to 20 mA input signal.

• Models available with 2 to 10 Vdc input signal.

• Die-cast aluminum housing.

Specifications

• Application Type: Electric

• Fail Safe Mode: Non-Spring Return

• Control Signal: Modulating, 4-20 mA

• Motor Shaft: Dual ended Shaft

• Stroke: Adjustable; 90 to 160 degrees, Symmetrical

• External Auxiliary Switches Available: Yes

• Frequency: 50 Hz, 60 Hz

• Power Consumption Driving (VA): 15 VA

• Shaft Dimensions (in.): .375 in

• Shaft Shape: Square

• Mounting: foot-mounted

• Dimensions: 6 7/16 in. high x 5 1/2 in. wide x 8 3/4 in. deep

• Temperature Range: -40 to 150F

• Deadweight Load on Shaft (Either End) (lb): 200 lbs

• Deadweight Load on Shaft (Combined on both shafts) (lb): 300 lbs

• Auxiliary Switch Ratings AFL - 120 Vac: 7.2A

• Auxiliary Switch Ratings AFL - 240 Vac: 3.6A

• Auxiliary Switch Ratings ALR- 120 Vac: 43.2A

• Auxiliary Switch Ratings ALR- 240 Vac: 21.6A